Cracked Laptop Screen Stop Booting Up 
Abel Benoie this booting in the fan spins for a few seconds and then it stops is normal behaviour from the fan. It does it because your computer does not boot or post. This could be related to pretty much anything from bad RAM, bad HDD to a bad processor.
cracked laptop screen stop booting up
Are you using a Windows 10/11 laptop but the computer screen goes black randomly? What do you do when your laptop screen goes black? Laptop screen black is an annoying thing but don't be worried. Here, this post is written for you to fix a laptop black screen (2 cases) to run the computer smoothly.
Perhaps you are experiencing a random PC black screen that can bother you a lot since there is not any error code or message giving you an idea where to start troubleshooting. Sometimes, you meet the situation - laptop screen black but still running/on.
An unexpected black screen can happen on Asus, Lenovo, HP or Dell laptops in a number of scenarios in Windows 10/11, which may stem from hardware issues and logical faults - for example, a connection problem with your display, power supply, hard disk, internal memory, graphics card, virus attack, mistaken operations, software incompatibility and more.
If the laptop screen keeps going black, you might be unable to enter the computer desktop. Then, you may ask: how can I back up my files in the event of an unbootable laptop? Actually, it is easy as long as you use a professional Windows backup software for Windows 11/10/8/7.
Here, your purpose is to back up files before fixing the random laptop black screen, so you need to manually choose what you need to back up. Just go to the Source module to enter the following interface, click Folders and Files and choose the significant files you want to back up in the pop-up window.
As mentioned in the first part, your laptop screen may get black due to many reasons. Here in this part, we will show you the different solutions to laptop screen black but still running/on due to different cases: hardware issues and software issues.
The most common and critical hardwares that can cause laptop black screen are the power supply, liquid crystal display, memory bank, hard disk, motherboard, etc. So it is necessary for you to troubleshoot these one by one.
2. If the power indicator is on all the time and the external power is plugged in properly, then a random laptop black screen is not caused by the power. So you need to carefully check the cooling fan port to see whether there is wind and check if the hard disk indicator light is on.
If yes, the motherboard, CPU, hard disk, graphics card, and memory don't go wrong. And perhaps it is the liquid crystal display that leads to the issue laptop screen keeps going black. And then you need an after-sales service to fix the displayer.
5. Sometimes, the laptop temperature is too high; in this case, if you often play games despite the heat dissipation performance bot being good, as a result, the screen goes black randomly due to the graphics card temperature being too high.
This way is an easy solution to laptop screen black but still running. Just use the Windows logo key + Ctrl + Shift + B keyboard shortcut to wake up your display. If Windows is responsive, a short beep will sound and the screen will blink or dim when Windows attempts to refresh the screen.
To scan and remove viruses, you also need to boot in Safe Mode with Networking, then run the installed antivirus program or download one online, and next perform a full scan of your Windows system to fix laptop screen black but still running/on.
On the other hand, if you have any question regarding our software or any method to repair black screen on your Asus, HP, Lenovo or Dell laptop, please send an email to [email protected] or leave your idea in the following comment part.
This error message often stops computers from booting correctly. It tells users that their PC has developed a problem and restarting is necessary to address the purported error. It also says Windows is collecting some error info and will restart at a given percentage.
Now, reboot the system normally. If the black screen is gone and everything is working, reverse the options above one by one. Enable one item in Task Manager, reboot, and ensure everything works. Then, repeat the process with the next item on the list. This will help you identify the program preventing your system from rebooting.
Acer laptops typically run on Windows, so you can use the usual keyboard shortcuts to take a screenshot. Press Print Screen (or PrtSc) to add the screenshot to the clipboard, or use Windows + PrtSc to save it as an image file. Alternatively, press Windows + Shift + S to open the Windows Snipping Tool.
You computer's battery may be experiencing problems if your computer boots up but shuts down shortly after booting up. The battery may not be holding a charge properly because the battery is old, the battery charger may be damaged or the DC jack on your laptop may not function properly. If your laptop's battery is more than a few years old, it's likely that the battery is losing the ability to fully recharge and may need to be replaced or plugged in all of the time. If your charger is damaged, you can replace the charger with a new one from the manufacturer. If the power connector jack on your laptop isn't working properly, the plug for your charger will keep slipping out. This won't allow the battery to recharge and you'll need to have it repaired to stop the problem.
Your laptop may experience hardware conflicts that cause it to shut down prematurely. It's not easy to remove a laptop's internal hardware, but you can easily remove any external hard drives, cameras or USB devices that are connected to your laptop. After your computer boots successfully without these devices, add them back one at a time to your system to see which device is problematic. You can stop using the device or you can uninstall the device that's causing problems and try to reinstall the device drivers.
Software conflicts can often cause your laptop to crash shortly after booting. Software conflicts can arise for a number of reasons, but it's common for multiple virus scanners that open at startup to cause conflicts. If you have a firewall installed, it may be denying startup services that your computer needs to operate. You can remove any unnecessary startup programs from the Windows System Configuration tool. This tool can be accessed from the Control Panel.
Shut down your laptop > boot into system recovery (press f11 repeatedly as soon as you press the power button) > then, select 'Troubleshoot'> 'Advanced options'> 'System Restore'. Then, follow on-screen instructions to finish.
Shut down your laptop > boot into system recovery (press f11 repeatedly as soon as you press the power button) > then, select "Troubleshoot"> "Advanced options"> "System Restore". Then, follow on-screen instructions to finish.
If you see a white screen or a rainbow of colors, this could mean the video card in the laptop is defective. In this case, the video card or graphics chip needs to be replaced by an authorized repair center for your brand of laptop.
The first thing you can try is booting into the recovery environment, if possible, and then performing a startup repair. To access the recovery environment, turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears.
If you are having trouble booting your Acer laptop, there may be a loose cable causing the issue. To check for a loose cable, first try disconnecting all of the cables from the motherboard, and then plugging them back in one at a time. If the issue persists, you may need to replace the motherboard.
A screen that doesn't turn on may be a sign of a malfunctioning screen or a bad connection between the computer and the monitor. For desktop computers, trying another monitor or cable is a simple way to see if one or the other is at fault. Of course, if you're having this trouble with your laptop or all-in-one system, or if a bad video card is the problem, some disassembly may be required.
Linux users encountering the black screen of death are likely to be running into the same kinds of problems as their closed-source-using colleagues. Broken video cards and kernel panics affect them, too. If it happens to you, you may try booting your computer without its graphical boot screen once, or even disable it entirely. There may be additional ways of tinkering with your boot sequence that other, closed operating systems don't provide.
The only annoying thing is I cannot navigate the BIOS menu for some tweaking because the BIOS not shown on the external monitor, instead, it only shown on the broken laptop screen, and it only output to my external monitor when Windows/OS is logged-on.
Most laptops detect a closed lid with a magnet and a sensor. There is a small magnet probably somewhere on the top edge of the screen, and a sensor in the area of the body of the laptop that it would be near when closed. You can use a small refrigerator magnet placed on the sensor to trick the laptop into thinking it's always closed, while still having access to keyboard and buttons.
I had a this problem with a 2011 ASUS A53SV laptop which has a broken screen. The laptop was being used like a desktop with an external monitor. It had an old hard drive, and I wanted to upgrade it to an SSD.
After taking the battery out and putting it back in, I followed this by doing the following: got Ubuntu on a DVD and took the hard drive out so only Ubuntu would boot from the DVD drive (afterwards I found out that the BIOS didn't allow booting from USB), then tried pressing F8 to switch display in an HDMI and then DVI connection. Only the DVI-to- monitor connection worked for this laptop, but it was relieving to see the BIOS on the screen for the first time after spamming F2. It may be notable that the laptop motherboard was connected to the broken screen via display cable when this occurred.